DP / CAN Coupler CANopen® + Layer 2

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant.
The I/O data of the CANopen® participants is shown in the PROFIBUS in a transparent and freely configurable manner.
The DP/CAN coupler is integrated in the hardware configurator with a GSD file and can be completely configured there. Additional tools are not necessary.

On PROFIBUS, all standard transfer rates up to 12 Mbps are supported

General information

• Dimensions (DxWxH) 114 x 18 x 108 mm
• Weight Approx. 110 g
• Status indicator 3 LEDs
• Voltage supply 24 V DC, 18–30 V DC
• Current draw typ. 180 mA with DC 24 V

PROFIBUS interface

• Number 2
• Protocol max. 12 Mbps, autom. detection
• Transmission rate PROFIBUS-DP
• I/O image size max. 240 bytes of input / 240 bytes of output data
• Connection SUB-D female connector, 9-pin

CAN interface

• Number 1
• Type ISO/DIN 11898-2 CAN High-speed physical layer
• Transmission rate 10 kbps ... 1 Mbps
• Protocol CANopen® master CAN 2.0A (11 bit)
• Connection Terminal 3-pin
• TPDOs 4
• RPDOs 4
• Features Sync timer

Ambient conditions

• Ambient temperature -25 °C ... +70°C
• Transport and storage temperature -40 °C … +75 °C
• Relative air humidity 95 % r H without condensation
• Pollution degree 2
• Protection rating IP20
• Certifications CE

CE

• RoHS Yes
• REACH Yes