You have no items in your shopping cart.

NETLink® PRO PoE

NETLinkĀ® PRO Compact, PROFIBUS Ethernet Gateway

Free shipping on Web orders over $100

$1488.00
(Each excl GST)
On Request
SKU: HELMZ-700-881-MPI21 Manufacturer part number: 700-881-MPI21 Manufacturer: HELMHOLZ

NETLink® PRO PoE

 

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.

It draws its supply voltage through the CPU of the automation device, or optionally via externally supplied DC 24 V, or a CAT5 network cable using a PoE power supply unit.
The NETLink PRO PoE enables the implementation of TCP/IP on the MPI/PPI/PROFIBUS with up to 32 simultaneously open connection channels. With the switchable single-master operation, passive bus participants can be addressed. The integration of SCADA, HMI, and OPC applications is possible via the widely used ISO on TCP (RFC 1006) protocol.
The applications are automatically detected and forwarded by the NETLink PRO PoE.

 

General information

  • Dimensions (DxWxH) 102 x 54 x 30 mm
  • Weight Approx. 180 g
  • Supported operating systems No limitation (the driver for SIMATIC NETLink-S7-NET only Windows XP, 2003R2, 7, 2008R2, 8.1, 2012R2, 10)
  • Status indicator 3 LEDs, 2 of them bi-color
  • Voltage supply 24 V DC, 18–30 V DC
  • Current draw Max. 150 mA with DC 24 V

POE

  • PoE Betriebsspannung 48 V as per IEEE 802.3af/at
  • PoE Leistungsklasse Class 1 (0.44 to 3.84 Watt)

Communication interface

  • Number 1
  • Type 10 Base-T

100 Base-TX

  • Transmission rate 10/100 Mbps autom. detection
  • Physical layer Ethernet
  • Protocol FDL, RFC 1006
  • Connection RJ45

MPI/PPI/PROFIBUS interface

  • Number 1
  • Type RS485, isolated
  • Transmission rate max. 12 Mbps autom. detection
  • Connection SUB-D male connector, 9-pin. with PG interface and repeater

Ambient conditions

  • Ambient temperature  0 °C ... +60°C
  • Transport and storage temperature  -20 °C … +80 °C
  • Relative air humidity  95 % r H without condensation
  • Pollution degree  2
  • Protection rating  IP20
  • Certifications CE

CE

  • RoHS Yes
  • REACH Yes

 

SKU: HELMZ-700-881-MPI21

MPN: 700-881-MPI21

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

NETLink® PRO PoE

 

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.

It draws its supply voltage through the CPU of the automation device, or optionally via externally supplied DC 24 V, or a CAT5 network cable using a PoE power supply unit.
The NETLink PRO PoE enables the implementation of TCP/IP on the MPI/PPI/PROFIBUS with up to 32 simultaneously open connection channels. With the switchable single-master operation, passive bus participants can be addressed. The integration of SCADA, HMI, and OPC applications is possible via the widely used ISO on TCP (RFC 1006) protocol.
The applications are automatically detected and forwarded by the NETLink PRO PoE.

 

General information

  • Dimensions (DxWxH) 102 x 54 x 30 mm
  • Weight Approx. 180 g
  • Supported operating systems No limitation (the driver for SIMATIC NETLink-S7-NET only Windows XP, 2003R2, 7, 2008R2, 8.1, 2012R2, 10)
  • Status indicator 3 LEDs, 2 of them bi-color
  • Voltage supply 24 V DC, 18–30 V DC
  • Current draw Max. 150 mA with DC 24 V

POE

  • PoE Betriebsspannung 48 V as per IEEE 802.3af/at
  • PoE Leistungsklasse Class 1 (0.44 to 3.84 Watt)

Communication interface

  • Number 1
  • Type 10 Base-T

100 Base-TX

  • Transmission rate 10/100 Mbps autom. detection
  • Physical layer Ethernet
  • Protocol FDL, RFC 1006
  • Connection RJ45

MPI/PPI/PROFIBUS interface

  • Number 1
  • Type RS485, isolated
  • Transmission rate max. 12 Mbps autom. detection
  • Connection SUB-D male connector, 9-pin. with PG interface and repeater

Ambient conditions

  • Ambient temperature  0 °C ... +60°C
  • Transport and storage temperature  -20 °C … +80 °C
  • Relative air humidity  95 % r H without condensation
  • Pollution degree  2
  • Protection rating  IP20
  • Certifications CE

CE

  • RoHS Yes
  • REACH Yes

 

SKU: HELMZ-700-881-MPI21

MPN: 700-881-MPI21