PROFINET Coupler PN / EtherNetIP

With the PN/EtherNetIP Coupler, a simple and uncomplicated connection of a PROFINET machine to an EtherNet/IP machine is possible. The PN/EtherNetIP Coupler allows data transmission between a PROFINET controller and an EtherNet/IP PLC.

Received input data on one side of the network are made available as output data on the other side of the network to the PLC. The I/O data exchange takes place live and as fast as possible without further handling blocks.

The maximum size of the transferable I/O data is 1024 bytes. Up to 3 input and 3 output assemblies can be configured on the EtherNet/IP network side. Up to 300 slots are available for I/O modules.

The integration into the PLC engineering tool is made possible by a GSDML file, an extra configuration software is not necessary. The configuration of the I/O data to be exchanged is performed in the Siemens engineering tool. An EDS file matching the configuration can then be downloaded from the website by the PN/EtherNetIP Coupler and used to configure the EtherNet/IP PLC.

General information

• Dimensions (DxWxH)32.5 x 58.5 x 76 mm mm
• WeightApprox. 135 g

PROFINET interface (X1)

• Number 1
• Connection 2 x RJ45, integrated switch
• Protocol PROFINET IO Device as defined in IEC 61158-6-10
• Transmission rate 100 Mbps full duplex
• I/O image size max. 1024 bytes of input and output data
• Features
  • media redundancy(MRP-Client),
  • automatic addressing,
  • Topologieerkennung (LLDP, DCP),
  • diagnosis alarms
  • PROFINET conformance class B

EtherNet/IP interface (X2)

• Number 1
• Connection 2x RJ45, integrated switch
• Protocol EtherNet/IP
  • implicit messaging (Transport Class 1)
  • explicit messaging (Transport Class 3)
• Transmission rate 10/100 Mbit/s, full-/half duplex
• I/O image size
  • 3x input assemblies + 3x output assemblies
  • together maximum 1024 bytes data
  • Number of the assemblies adjustable

Status indicator

• Function indicator 9 LEDs
• Ethernet status 8 LEDs

Power supply

• Operating voltage 24 V DC (18 - 28 V DC)
• Current draw max. 140 mA
• Power dissipation max. 3.4 W

Ambient conditions

• Ambient temperature 0 °C to 60 °C
• Transport and storage temperature -20 °C to 80 °C
• Relative air humidity 95% non-condensing
• Protection rating IP 20
• Certifications CE, UL

CE

• RoHS Yes
• REACH Yes

UL

• UL UL 61010-1 / UL 61010-2-201
• Surrounding Air Temperature DC 24 V (18 ... 28 VDC, SELV and limited energy circuit)
• Pollution degree 2
• Altitude Up to 2000m
• Temperature cable rating 87 °C