PROFINET / CAN-Gateway CANopen Slave

The PN/CAN gateway "CANopen Slave" enables the coupling of machines with CANopen bus to machines with PROFINET network and represents a freely configurable full CANopen Slave Device at the CAN bus.

On the PROFINET network the PN/CAN gateway "CANopen Slave" is a PROFINET I/O device and supports transfer rates up to 100 Mbit full duplex. The data of the CANopen SDOs are transparently and freely configurably inserted into the PROFINET network and can thus be read or written directly in the PLC. The PN/CAN gateway is integrated into the hardware configurator of the PROFINET controller with a GSDML file, and all values of the CANopen slave are available as IO information. Special handling blocks are not necessary.

An EDS or DCF file is used to permanently load a plant-specific CANopen device configuration into the device.

The features MRP (media redundancy) as well as extensive diagnostic functions and an interface for online diagnostics complete the performance features of the PN/CAN gateway.

The gateway supports CANopen network management, nodeguarding/heartbeat, emergencies and SDO accesses on the CAN bus. Up to 16 RX- and Tx-PDOs can be parameterized.
It is also possible to parameterize the CANopen device including PDO mapping via the CAN bus and to send customer specific emergency messages.

General information

• Dimensions (DxWxH) 35 x 84 x 76 mm
• Weight Approx. 160 g
• Status indicator
  • 3 LEDs, function status
  • 4 LEDs, Ethernet status
• Voltage supply 24 V DC, 18–30 V DC
• Current draw Max. 250 mA with 24 V DC

USB interface

• Protocol Full-speed USB 2.0 device
• Connection Mini-USB
• Isolation voltage 1.5 kV
• Electrical isolation Yes

Ambient conditions

• Ambient temperature 0 °C ... +60°C
• Transport and storage temperature -20 °C … +80 °C
• Relative air humidity 95 % r H without condensation
• Pollution degree 2
• Protection rating IP20
• Certifications CE

CE

• RoHS Yes
• REACH Yes