You have no items in your shopping cart.

Relay Module - 24V DC 5A 4CO contacts

WAGO Relay socket with red status indicator 5A 4CO contacts 24VDC; 31 mm; 1,50 mm²; Gray

Free shipping on Web orders over $100

$39.60
(Each excl GST)
On Request
Quantity Breaks
1+
25+
100+
$39.60
$39.60
$39.60
SKU: WAGO-858-304 Manufacturer part number: 858-304 Manufacturer: WAGO

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²

 

Control Circuit
 
Nominal input voltage UN
DC 24 V
Input voltage range -20 … +10 %
Nominal input current at UN 37 mA
   
Load circuit
 
Number of changeover/switchover contacts
4
Contact material (relay) AgCe
Limiting continuous current 5 A
Inrush current (resistive) max. (AC) 15 A / 4 s
Switching voltage (max.) AC 250 V
Switching power (resistive) max. AC 1250 VA; DC (see load limit curve)
Switching capacity AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V
Recommended minimum load 12 V / 100 mA
Pull-in time (typ.) 25ms
Drop-out time (typ.) 25ms
Bounce time (typ.) 4ms
Electrical life (NO; resistive load; 23 °C) 100 x 10³ switching operations
Mechanical life 20 x 10⁶ switching operations
   
Signaling
 
Status indicator
Red LED
  Mechanical
Safety and protection
 
Rated voltage
300V
Rated surge voltage 2.5kV
Overvoltage category II
Pollution degree 2
Dielectric strength (control/load circuit) (AC, 1 min) 1.5 kVrms
Dielectric strength (open contact) (AC, 1 min) 1 kVrms
Dielectric strength (load/load circuit) (AC, 1 min) 1.5 kVrms
Insulation type (control/load circuit) Basic insulation
Insulation type (open contact) Functional insulation
Insulation type (load/load circuit) Basic insulation
Insulation type (adjacent devices) Reinforced insulation (safe isolation)
Protection type IP20
   
Connection data
 
Connection technology
Push-in CAGE CLAMP®
Solid conductor 0.34 … 1.5 mm² / 22 … 16 AWG
Fine-stranded conductor 0.34 … 1.5 mm² / 22 … 16 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inches
Note (conductor cross-section) 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG
   
Physical data
 
Width
31 mm / 1.22 inches
Height 97 mm / 3.819 inches
Depth from upper-edge of DIN-rail 73 mm / 2.874 inches
   
Mechanical data
 
Mounting type
DIN-35 rail
Mounting position horizontal (standing/lying); vertical

 

SKU WAGO-858-304
GTIN 4055143567770
We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²

 

Control Circuit
 
Nominal input voltage UN
DC 24 V
Input voltage range -20 … +10 %
Nominal input current at UN 37 mA
   
Load circuit
 
Number of changeover/switchover contacts
4
Contact material (relay) AgCe
Limiting continuous current 5 A
Inrush current (resistive) max. (AC) 15 A / 4 s
Switching voltage (max.) AC 250 V
Switching power (resistive) max. AC 1250 VA; DC (see load limit curve)
Switching capacity AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V
Recommended minimum load 12 V / 100 mA
Pull-in time (typ.) 25ms
Drop-out time (typ.) 25ms
Bounce time (typ.) 4ms
Electrical life (NO; resistive load; 23 °C) 100 x 10³ switching operations
Mechanical life 20 x 10⁶ switching operations
   
Signaling
 
Status indicator
Red LED
  Mechanical
Safety and protection
 
Rated voltage
300V
Rated surge voltage 2.5kV
Overvoltage category II
Pollution degree 2
Dielectric strength (control/load circuit) (AC, 1 min) 1.5 kVrms
Dielectric strength (open contact) (AC, 1 min) 1 kVrms
Dielectric strength (load/load circuit) (AC, 1 min) 1.5 kVrms
Insulation type (control/load circuit) Basic insulation
Insulation type (open contact) Functional insulation
Insulation type (load/load circuit) Basic insulation
Insulation type (adjacent devices) Reinforced insulation (safe isolation)
Protection type IP20
   
Connection data
 
Connection technology
Push-in CAGE CLAMP®
Solid conductor 0.34 … 1.5 mm² / 22 … 16 AWG
Fine-stranded conductor 0.34 … 1.5 mm² / 22 … 16 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inches
Note (conductor cross-section) 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG
   
Physical data
 
Width
31 mm / 1.22 inches
Height 97 mm / 3.819 inches
Depth from upper-edge of DIN-rail 73 mm / 2.874 inches
   
Mechanical data
 
Mounting type
DIN-35 rail
Mounting position horizontal (standing/lying); vertical

 

SKU WAGO-858-304
GTIN 4055143567770

Customers who bought this item also bought

2 Pole - Push Terminal - 2.5mm (Grey) WAGO-2202-1201
$1.33
(Each excl GST)
In Stock
2 Pole - Cage Clamp Terminal - 10mm (Grey) WAGO-2010-1201
$3.43
(Each excl GST)
In Stock
Snap on end stop - 6mm width WAGO-249-116
$1.09
(Each excl GST)
In Stock
End Plate for 2 Pole - 2.5mm WAGO-2002-1292
$0.77
(Each excl GST)
In Stock
WAGO Relay socket; red status indication; 2 changeover contacts - 24VDC; 8 A; 15 mm; 2,50 mm²; Gray WAGO-788-312
$22.60
(Each excl GST)
In Stock