PreviousBuscoupler PROFINET IO
NextBuscoupler CANopen

Buscoupler PROFIBUS-DP

TB20-C, Buscoupler PROFIBUS-DP

Free shipping on Web orders over $100

$440.00
(Each excl GST)
On Request
SKU: HELMZ-600-151-1AA11 Manufacturer part number: 600-151-1AA11 Manufacturer: HELMHOLZ

TB20 bus coupler PROFIBUS

 

The PROFIBUS-DP bus coupler is designed to connect a PROFIBUS bus to TB20 peripheral modules. It supports the DP-V0 and DP-V1 protocols.
It will recognize all connected peripheral modules and assign each module the corresponding inputs/outputs from the process image table.
A functioning TB20 configuration will always require a bus coupler and at least one peripheral module, but can accommodate up to 64 modules of any kind connected in series with the bus coupler. The bus coupler supports hot-swap for replacing modules during operation.

Note: Individual modules cannot be combined with the IO systems of other manufacturers.

General information

  • Dimensions (DxWxH)73 x 35 x 110 mm
  • WeightApprox. 115 g
  • Number of modules that can be connected in series 64
  • Voltage supply 24 VDC, 18–28 VDC
  • Power dissipation Max. 8 W
  • Permissible cable cross-section AWG 16 .. 22
  • Mounting position Any

PROFIBUS interface

  • Number 1
  • Protocol PROFIBUS DP/V0 & DP/V1
  • Transmission rate 9.6 Kbaud ... 12 Mbaud, automatic detection
  • I/O image size 244/244 bytes
  • Parameter configuration length 244 bytes
  • Interface RS485
  • Connection 9-pin D-sub female connector

USB interface

  • Number 1
  • Protocol Full-speed USB 1.1 device
  • Connection Mini-USB
  • Isolation voltage 1.5 kV
  • Electrical isolation Yes

Current draw

  • Current draw without modules (internal) 75 mA
  • Power supply for modules 5 V DC, max 2.5 A

Ambient conditions

  • Ambient temperature 0 °C … +60 °C
  • Transport and storage temperature -20 °C … +80 °C
  • Relative air humidity 95 % r H without condensation
  • Protection rating IP 20
  • Certifications CE, UL

UL

  • Surrounding Air Temperature 0 °C … +50 °C
  • Pollution degree 2

CE

  • Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock""
  • RoHS Yes
  • REACH Yes

SKU: HELMZ-600-151-1AA11

MPN: 600-151-1AA11

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TB20 bus coupler PROFIBUS

 

The PROFIBUS-DP bus coupler is designed to connect a PROFIBUS bus to TB20 peripheral modules. It supports the DP-V0 and DP-V1 protocols.
It will recognize all connected peripheral modules and assign each module the corresponding inputs/outputs from the process image table.
A functioning TB20 configuration will always require a bus coupler and at least one peripheral module, but can accommodate up to 64 modules of any kind connected in series with the bus coupler. The bus coupler supports hot-swap for replacing modules during operation.

Note: Individual modules cannot be combined with the IO systems of other manufacturers.

General information

  • Dimensions (DxWxH)73 x 35 x 110 mm
  • WeightApprox. 115 g
  • Number of modules that can be connected in series 64
  • Voltage supply 24 VDC, 18–28 VDC
  • Power dissipation Max. 8 W
  • Permissible cable cross-section AWG 16 .. 22
  • Mounting position Any

PROFIBUS interface

  • Number 1
  • Protocol PROFIBUS DP/V0 & DP/V1
  • Transmission rate 9.6 Kbaud ... 12 Mbaud, automatic detection
  • I/O image size 244/244 bytes
  • Parameter configuration length 244 bytes
  • Interface RS485
  • Connection 9-pin D-sub female connector

USB interface

  • Number 1
  • Protocol Full-speed USB 1.1 device
  • Connection Mini-USB
  • Isolation voltage 1.5 kV
  • Electrical isolation Yes

Current draw

  • Current draw without modules (internal) 75 mA
  • Power supply for modules 5 V DC, max 2.5 A

Ambient conditions

  • Ambient temperature 0 °C … +60 °C
  • Transport and storage temperature -20 °C … +80 °C
  • Relative air humidity 95 % r H without condensation
  • Protection rating IP 20
  • Certifications CE, UL

UL

  • Surrounding Air Temperature 0 °C … +50 °C
  • Pollution degree 2

CE

  • Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock""
  • RoHS Yes
  • REACH Yes

SKU: HELMZ-600-151-1AA11

MPN: 600-151-1AA11

Categories
Brands
Contact Info
1800 931 559

Mon-Fri 8:00am - 5:00pm

sales@lappaustralia.com.au
12 Grevillea St, Eastern Creek NSW

Australia

Information
Customer Service
Copyright © 2024 LAPP Australia. All rights reserved.