Energy Meter, 1 A

In addition to general status information, the module's configuration can be used to show up to 7 readings in the input image table.
In the event of a system failure, the controllable meter's values will be stored in non-volatile memory.

Input currents are coupled through current transformers. The Energy Meter module is designed for a maximum secondary current of 1 A.
Other rated secondary currents, as well as the use of Rogowski coils, are available upon request.

General information

• Dimensions (DxWxH) 110 x 25 x 73 mm
• Weight Approx. 120 g
• Number of inputs Voltage L1, L2, L3, N, Current I1, I2, I3
• Voltage Max. 400 V AC
• Current Max. 1 A, secondary
• from the backplane bus Yes
• Diagnoses Undervoltage/overvoltage, Overcurrent, No zero crossing, Phase shift
• Parameter configuration length 25/49 bytes
• General error indicator Red LED
• Internal Max. 150 mA
• Power dissipation Max. 2.0 W
• Hot-swap capable Yes

Ambient conditions

• Ambient temperature 0 °C … +60 °C
• Transport and storage temperature -20 °C … +80 °C
• Relative air humidity 95 % r H without condensation
• Protection rating IP 20
• Certifications CE, UL

CE

• Noise immunity DIN EN 61000-6-2 “EMC Immunity”
• Interference emission DIN EN 61000-6-4 “EMC Emission”
• Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
• RoHS Yes
• REACH Yes