PreviousEnergy Meter, 1 A
NextEnergy Meter, 1 A

Energy Meter, 5 A

TB20, Energy Meter, 5 A

Free shipping on Web orders over $100

$508.00
(Each excl GST)
On Request
SKU: HELMZ-600-255-7BA21 Manufacturer part number: 600-255-7BA21 Manufacturer: HELMHOLZ

Energy Meter 5 A

 

Input voltages (3 phases + N) can be connected directly to the module.
In addition to general status information, the module's configuration can be used to show up to 7 readings in the input image table.
In the event of a system failure, the controllable meter's values will be stored in non-volatile memory.

Input currents are coupled through current transformers. The Energy Meter module is designed for a maximum secondary current of 5 A.
Other rated secondary currents, as well as the use of Rogowski coils, are available upon request.

General information

  • Dimensions (DxWxH) 110 x 25 x 73 mm
  • Weight Approx. 120 g
  • Number of inputs Voltage L1, L2, L3, N, Current I1, I2, I3
  • Voltage Max. 400 V AC
  • Current Max. 5 A, secondary
  • from the backplane bus Yes
  • Diagnoses Undervoltage/overvoltage, Overcurrent, No zero crossing, Phase shift
  • Parameter configuration length 25/49 bytes
  • General error indicator Red LED
  • Internal Max. 150 mA
  • Power dissipation Max. 2.0 W
  • Hot-swap capable Yes

Ambient conditions

  • Ambient temperature 0 °C … +60 °C
  • Transport and storage temperature -20 °C … +80 °C
  • Relative air humidity 95 % r H without condensation
  • Protection rating IP 20
  • Certifications CE, UL

CE

  • Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
  • RoHS Yes
  • REACH Yes

 

SKU: HELMZ-600-255-7BA21

MPN: 600-255-7BA21

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Energy Meter 5 A

 

Input voltages (3 phases + N) can be connected directly to the module.
In addition to general status information, the module's configuration can be used to show up to 7 readings in the input image table.
In the event of a system failure, the controllable meter's values will be stored in non-volatile memory.

Input currents are coupled through current transformers. The Energy Meter module is designed for a maximum secondary current of 5 A.
Other rated secondary currents, as well as the use of Rogowski coils, are available upon request.

General information

  • Dimensions (DxWxH) 110 x 25 x 73 mm
  • Weight Approx. 120 g
  • Number of inputs Voltage L1, L2, L3, N, Current I1, I2, I3
  • Voltage Max. 400 V AC
  • Current Max. 5 A, secondary
  • from the backplane bus Yes
  • Diagnoses Undervoltage/overvoltage, Overcurrent, No zero crossing, Phase shift
  • Parameter configuration length 25/49 bytes
  • General error indicator Red LED
  • Internal Max. 150 mA
  • Power dissipation Max. 2.0 W
  • Hot-swap capable Yes

Ambient conditions

  • Ambient temperature 0 °C … +60 °C
  • Transport and storage temperature -20 °C … +80 °C
  • Relative air humidity 95 % r H without condensation
  • Protection rating IP 20
  • Certifications CE, UL

CE

  • Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
  • RoHS Yes
  • REACH Yes

 

SKU: HELMZ-600-255-7BA21

MPN: 600-255-7BA21

Categories
Brands
Contact Info
1800 931 559

Mon-Fri 8:00am - 5:00pm

sales@lappaustralia.com.au
12 Grevillea St, Eastern Creek NSW

Australia

Information
Customer Service
Copyright © 2024 LAPP Australia. All rights reserved.