PreviousBuscoupler ModbusTCP
NextBuscoupler EtherCAT

Buscoupler EtherNet/IP

TB20-C, Buscoupler EtherNet/IP

Free shipping on Web orders over $100

$468.00
(Each excl GST)
On Request
SKU: HELMZ-600-175-1AA11 Manufacturer part number: 600-175-1AA11 Manufacturer: HELMHOLZ

TB20 bus coupler EtherNet / IP

 
The EtherNet/IP bus coupler makes it possible to access data from peripheral modules using the EtherNet/IP protocol. It can accommodate up to 64 modules of any kind connected in series with the bus coupler.

The EtherNet/IP bus coupler features an integrated two-port switch that allows for star and line topology configurations.
A large I/O image table size of one kbyte makes it possible to implement comprehensive and complex systems.
TB20 ToolBox can be used to easily configure the system and the various module parameters and transfer the corresponding settings to the coupler.
A functioning TB20 configuration will always require a bus coupler and at least one peripheral module. The bus coupler supports hot-swapping for replacing modules during operation.

Note: Individual modules cannot be combined with the IO systems of other manufacturers.

General information

  • Dimensions (DxWxH) 73 x 35 x 110 mm
  • Weight Approx. 115 g
  • Number of modules that can be connected in series 64
  • Voltage supply 24 VDC, 18–28 VDC
  • Power dissipation Max. 8 W
  • Permissible cable cross-section AWG 16 .. 22
  • Mounting position Any

EtherNet/IP interface

  • Number 2
  • Connection RJ45
  • Protocol transmission model Implicit messaging (transport class 1), explicit messaging (transport class 3)
  • Transmission rate 10/100 Mbps, automatic detection
  • Input/output assembly size 511/511 bytes
  • IP address Can be set with software and/or DIP switch
  • DHCP Yes, can be selected using DIP switch

USB interface

  • Number 1
  • Protocol Full-speed USB 1.1 device
  • Connection Mini-USB
  • Isolation voltage Yes
  • Electrical isolation 1.5 kV

Current draw

  • Current draw without modules (internal) 75 mA
  • Power supply for modules 5 V DC, max 2.5 A

Ambient conditions

  • Ambient temperature 0 °C … +60 °C
  • Transport and storage temperature -20 °C … +80 °C
  • Relative air humidity 95 % r H without condensation
  • Protection rating IP 20
  • Certifications CE, UL

UL

  • Surrounding Air Temperature 0 °C … +50 °C
  • Pollution degree 2

CE

  • Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
  • RoHS Yes
  • REACH Yes

 

SKU: HELMZ-600-175-1AA11

MPN: 600-175-1AA11

We strive to provide you with the best information we can, considering the images are not to scale and do not represent detailed perspectives of the respected products. If you notice any errors or omissions in this information, please let us know using the contact us tab on this page.
*
*
*
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TB20 bus coupler EtherNet / IP

 
The EtherNet/IP bus coupler makes it possible to access data from peripheral modules using the EtherNet/IP protocol. It can accommodate up to 64 modules of any kind connected in series with the bus coupler.

The EtherNet/IP bus coupler features an integrated two-port switch that allows for star and line topology configurations.
A large I/O image table size of one kbyte makes it possible to implement comprehensive and complex systems.
TB20 ToolBox can be used to easily configure the system and the various module parameters and transfer the corresponding settings to the coupler.
A functioning TB20 configuration will always require a bus coupler and at least one peripheral module. The bus coupler supports hot-swapping for replacing modules during operation.

Note: Individual modules cannot be combined with the IO systems of other manufacturers.

General information

  • Dimensions (DxWxH) 73 x 35 x 110 mm
  • Weight Approx. 115 g
  • Number of modules that can be connected in series 64
  • Voltage supply 24 VDC, 18–28 VDC
  • Power dissipation Max. 8 W
  • Permissible cable cross-section AWG 16 .. 22
  • Mounting position Any

EtherNet/IP interface

  • Number 2
  • Connection RJ45
  • Protocol transmission model Implicit messaging (transport class 1), explicit messaging (transport class 3)
  • Transmission rate 10/100 Mbps, automatic detection
  • Input/output assembly size 511/511 bytes
  • IP address Can be set with software and/or DIP switch
  • DHCP Yes, can be selected using DIP switch

USB interface

  • Number 1
  • Protocol Full-speed USB 1.1 device
  • Connection Mini-USB
  • Isolation voltage Yes
  • Electrical isolation 1.5 kV

Current draw

  • Current draw without modules (internal) 75 mA
  • Power supply for modules 5 V DC, max 2.5 A

Ambient conditions

  • Ambient temperature 0 °C … +60 °C
  • Transport and storage temperature -20 °C … +80 °C
  • Relative air humidity 95 % r H without condensation
  • Protection rating IP 20
  • Certifications CE, UL

UL

  • Surrounding Air Temperature 0 °C … +50 °C
  • Pollution degree 2

CE

  • Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  • Interference emission DIN EN 61000-6-4 “EMC Emission”
  • Vibration and shock resistance DIN EN 60068-2-6:2008 „Vibration“, DIN EN 60068-2-27:2010 „Shock"
  • RoHS Yes
  • REACH Yes

 

SKU: HELMZ-600-175-1AA11

MPN: 600-175-1AA11

Customers who bought this item also bought

Analog I/P 8x U, +-10V, 0-10V, 1-5V, Iso., 16 Bit

Show details for Analog I/P 8x U, +-10V, 0-10V, 1-5V, Iso., 16 Bit
TB20, Analog input module - AI 8x U, +-10V, 0-10V, 1-5V, Iso., 16 Bit HELMZ-600-252-7BH21
$848.00
(Each excl GST)
On Request
Add to cart
Categories
Brands
Contact Info
1800 931 559

Mon-Fri 8:00am - 5:00pm

sales@lappaustralia.com.au
12 Grevillea St, Eastern Creek NSW

Australia

Information
Customer Service
Copyright © 2024 LAPP Australia. All rights reserved.